RDR adjustable flow regulators are made of a plastic material classified M1 with a temperature limit of use of 60°C.
They can be adjusted on site to the desired flow rate to ensure a set flow rate in a pressure range between 50 and 250 Pascals.
The flow regulator is mounted by a simple interlocking system inside the vertical or horizontal duct. In a horizontal duct, respect the DOWN direction indicated on the front of the regulator. A lip seal provides sealing.
Do not handle or press on the mobile flap (regulating element) during implementation. The direction of the air flow indicated on the cuff must be followed.
When the regulator is associated with an air diffusion vent, the minimum distance between it and the regulator must be at least one diameter in extraction and three diameters at the inlet vent.
We have a real identity that guides our actions on a daily basis and that irrigates our choices for more than 60 years now.
We are fully mobilized to keep our promises to our customers and stakeholders.
What is invisible is often what is most valuable. We are “wellness manufacturers”. We design products that improve living conditions.