The FILÉA 30 filtering air inlet (30 m³/h under 20 Pa) is fitted with a fine particle filter. Made of ABS, it is installed on the interior side during the renovation in the main rooms (living rooms and bedrooms) for the supply of fresh air from single-flow mechanical ventilation systems.
The front cap, placed on the outside, is made of UV and weather resistant polystyrene in the same colors as the air inlets.
Press the clips located at each end to remove the front flange. Fix the air inlet with 2 screws on the
354 x 12mm notch. Refit the flange using the simple interlocking system. On the outside, the cap centered on the notch is fixed by 3 screws.
The filter should be changed at least once a year:
• Press the 2 clips placed at each end and remove the front flange
• Pull on the filter so as to remove it from the air inlet
• Insert the new filter by placing it correctly behind the retaining bars located at each end
• Refit the front flange of the air inlet
We have a real identity that guides our actions on a daily basis and that irrigates our choices for more than 60 years now.
We are fully mobilized to keep our promises to our customers and stakeholders.
What is invisible is often what is most valuable. We are “wellness manufacturers”. We design products that improve living conditions.