CTP2

Roof vents (plastic)

The CTP2 roof vent is used for the air outlet or intake of installations using mechanical ventilation systems: single and double flow CMV, domestic kitchen hoods.

It adapts to practically all tile or slate roofing systems, and ensures a good seal.

The cover and the connection duct are made of plastic.

Lead sheet 500 x 385 mm or recycled PVB 600 x 385 mm (Polyvinyl Butyral) available.

Our product complies with the environmental regulations for construction RE2020.

Before installation, it is advisable to apply patina oil to the lead plate in order to avoid any dirt on the neighboring tiles.

– Form the sheet of lead (1) so that it conforms to the underlying shape while avoiding the crimping area.

– If it is a tile roof, it is desirable to make a wedging in the direction of the battens in order to support the sheet of leaden (A) and (B).

– For better waterproofing of the PVB flashing, use a high-adhesion hybrid MS polymer.

– Install the rain cover with the air flow perpendicular to the slope of the roof (see figure opposite).

Warning: it is important to check the airtightness of the duct/ventilation box and the roof duct/vent.

Download Technical Data Sheet

The key points of the product

New releases 2025

We are committed to innovating and improving our products to ensure better ventilation.

Warranty

All our products are guaranteed for 2 years.

French made

Our products are manufactured and assembled in France, in our factories in Torcieu in the Ain department.

Easy maintenance

Regular maintenance of the products is necessary in order to guarantee optimal efficiency.

Alternative to lead

We offer a solution made of recycled PVB.

Authenticity
and Commitment

We have a real identity that guides our actions on a daily basis and that irrigates our choices for more than 60 years now.

We are fully committed to keeping our promises to our clients and ‘Stakeholders’.

CTP2

The key points of the product

Authenticity and Commitment

Authenticity
and Commitment