AURÉA white plastic grilles are intended for the intake and extraction of air in housing and tertiary premises. These vents are specially designed to be installed in the ceiling or wall position.
Optional: In the case of use at the inlet vent, a removable deflector (sold separately) makes it possible to channel the diffusion of air.
AURÉA vents can be combined with an RDR type flow regulator.
Entirely made of polystyrene.
They can be mounted directly on the duct or be associated with a sleeve or a sleeve.
Mounting by a simple interlocking system on the duct. Maintaining and sealing being ensured by the lip seal.
On cuff or sleeve:
Assembly of the vent without joint on the sleeve previously fixed on the duct or on the drywall or through-slab sleeve previously fixed to the ceiling. A gasket ensures the seal between the sleeve and the duct.
Installation with flow regulator:
The RDR flow regulator is mounted by a simple interlocking system inside the duct (see RDR assembly).
At the inlet vent, the minimum distance between the AUREA vent and the regulator must be at least three diameters.
At the extract vent, the minimum distance between the AUREA vent and the regulator must be at least one diameter.
We have a real identity that guides our actions on a daily basis and that irrigates our choices for more than 60 years now.
We are fully mobilized to keep our promises to our customers and stakeholders.
What is invisible is often what is most valuable. We are “wellness manufacturers”. We design products that improve living conditions.