ALIZÉ extract vents with airflow modulation for the tertiary sector provide a fixed permanent airflow and a timed additional airflow (under 80 Pa) controlled by a presence detection (battery operated air vents 2 x 1.5 V, 12 V or 230 V).
Mounting can be done in a wall or ceiling position, in compliance with the following requirements:
In the wall position, the vents are mounted by a simple interlocking system on a Ø 125 mm duct or on a Ø125 mm sleeve to be sealed. The lip seal provides retention and sealing.
On the ceiling, the implementation can be carried out using a drywall 3-claw adapter sleeve or a Ø125 mm through-slab sleeve.
The vents have 3 fixing holes.
It is advisable to screw the vents to the wall or ceiling using the holes provided for this purpose. The electric vents must be fixed.
The vents have a cable grommet for the power supply
• Battery powered: When mounted on a wall, the lens must be located in the lower part of the vent. When mounted on a ceiling, the detection lens must be oriented towards the center of the room.
It is advisable to screw the vent on the wall using the 3 holes provided on the plate.
The batteries must be changed when the vent emits a series of 5 beeps when the shutter is opened.
• 12 V AC/DC or 230 V power supply: the vent must be powered by a 2-wire cable (2 x 1.5 mm²) that must be built in and must come out at the back of the support plate.
The 230 V power supply must include a suitable protection device marked on the electrical panel in order to be able to carry out work on the vent. Class II electrical appliance.
Whatever the output of the power supply, the vent must be screwed to the wall or the ceiling using the 3 holes provided on the plate.
When mounted on a wall, the lens must be located in the lower part of the vent. When mounted on a ceiling, the detection lens must be oriented towards the center of the room.
We have a real identity that guides our actions on a daily basis and that irrigates our choices for more than 60 years now.
We are fully mobilized to keep our promises to our customers and stakeholders.
What is invisible is often what is most valuable. We are “wellness manufacturers”. We design products that improve living conditions.