Alizé hygro tempo kitchen

Extract vents for humidity-controlled ventilation systems

The ALIZÉ HYGRO TEMPO (HC) vent provides a modulated flow according to the ambient relative humidity of the room and a timed complementary flow (30 minutes) whose opening is controlled by the user.

The vent can be mounted on a wall or ceiling position, in compliance with the following requirements:

In the wall position, the vents are mounted by a simple interlocking system on a Ø 125 mm duct or on a Ø125 mm sleeve to be sealed. The lip seal provides retention and sealing.

On the ceiling, the implementation can be carried out using a drywall 3-claw adapter sleeve or a Ø125 mm through-slab sleeve.

The vents have 3 fixing holes. It is advisable to screw the vents to the wall or ceiling using the 3 holes provided for this purpose. The electric vents must be fixed.

The vents have a cable grommet for the power supply and for the push button. See diagram opposite.

Cord control: In the case of ceiling mounting, it is necessary to use an angle piece to guide the cord.
Battery powered: the vent must be connected to the closing push-button by a 2-wire cable (2 x 0.75 mm² max) that must be built in and must come out at the back of the support plate. Connection on the terminal block. The batteries must be changed when the vent emits a series of 5 beeps when the shutter is opened.
12 V AC/DC or 230 V power supply: the vent must be powered by a 2-wire cable (2 x 1.5 mm²) that must be built in and must come out at the back of the support plate. Class II electrical appliance.

The 230 V power supply must include a suitable protection device marked on the electrical panel in order to be able to carry out work on the vent.

It is advisable to screw the grille support plate to the wall or the ceiling using the 3 holes provided on the plate.

Download Technical Data Sheet

The key points of the product

Warranty

All our products are guaranteed for 2 years.

French made

Our products are manufactured and assembled in France, in our factories in Torcieu in the Ain department.

Battery-powered

Power is supplied by 2 batteries
1.5 V type LR6 (not supplied). The maximum flow is obtained by pressing a closing push button with a time delay of 30 minutes.

12V or 230V power supply

The power supply can be
12 V AC/DC or 230 V. The maximum flow rate of these vents is obtained either by pressing an opening push button, or by remote control with a time delay of 30 minutes.

remote control

The maximum flow is obtained either by pressing an opening push button, or by remote control, with a time delay of 30 minutes.
(12V or 230V power supply).

Cord control

The maximum flow is obtained manually by activating the cord with a time delay of 30 minutes.

Authenticity
and Commitment

We have a real identity that guides our actions on a daily basis and that irrigates our choices for more than 60 years now.

We are fully mobilized to keep our promises to our customers and stakeholders.

Alizé hygro tempo kitchen

The key points of the product

Authenticity and Commitment

Authenticity
and Commitment