Alizé Hygro Tempo Vision

Extract vents for the ALIZE tertiary range

ALIZÉ extract vents with airflow modulation for the tertiary sector ensure a permanent airflow modulated according to the ambient relative humidity of the room as well as an additional timed airflow (under 80 Pa) controlled by a presence detection (battery operated air vents 2 x 1.5V, 12V or 230V).

Mounting can be done in a wall or ceiling position, in compliance with the following requirements:

In the wall position, the vents are mounted by a simple interlocking system on a Ø 125 mm duct or on a Ø125 mm sleeve to be sealed. The lip seal provides support and sealing.

On the ceiling, the implementation can be carried out using a drywall 3-claw adapter sleeve or a Ø125 mm through-slab sleeve.

The vents have 3 fixing holes.

It is advisable to screw the vents to the wall or ceiling using the holes provided for this purpose.

The vents have a cable grommet for the power supply.

Battery powered: When mounted on a wall, the lens must be located in the lower part of the vent. When mounted on a ceiling, the detection lens must be oriented towards the center of the room.

It is advisable to screw the vent on the wall using the

3 holes provided on the plate.

The batteries must be changed when the vent emits a series of 5 beeps when the shutter is opened.
12 V AC/DC or 230 V power supply: the vent must be powered by a 2-wire cable (2 x 1.5 mm²) that must be built in and must come out at the back of the support plate.

The 230 V power supply must include a suitable protection device marked on the electrical panel in order to be able to carry out work on the vent. Class II electrical appliance.

Whatever the power of the power supply, the vent must be screwed to the wall or the ceiling using the 3 holes provided on the plate.

When mounted on a wall, the lens must be located in the lower part of the vent. When mounted on a ceiling, the detection lens must be oriented towards the center of the room.

Download Technical Data Sheet

The key points of the product

Easy maintenance

Regular maintenance of the products is necessary in order to guarantee optimal efficiency.

Warranty

All our products are guaranteed for 2 years.

French made

Our products are manufactured and assembled in France, in our factories in Torcieu in the Ain department.

Battery powered

Power is supplied by two 1.5 V LR6 type batteries (not supplied). The maximum flow is obtained by a presence detection with a time delay of 30 minutes.

12V or 230V power supply

The power supply can be
12 V AC/DC or 230 V. The maximum flow rate of these vents is obtained by a presence detection with a time delay of 30 minutes.

Humidity controlled

The Alizé Hygro Tempo units modulate the airflows extracted according to the relative humidity of the premises in which they are installed, as well as a timed additional airflow.

Authenticity
and Commitment

We have a real identity that guides our actions on a daily basis and and has shaped our choices for more than 60 years.

We are fully committed to keeping our promises to our clients and ‘Stakeholders’.

Alizé Hygro Tempo Vision

The key points of the product

Authenticity and Commitment

Authenticity
and Commitment