Alizé hygro Elec with or without tempo timer

Extract vents for the ALIZE tertiary range

ALIZÉ extract vents with airflow modulation for the tertiary sector ensure a permanent airflow modulated according to the ambient relative humidity of the room and an additional airflow (under 80 Pa) that is timed or not controlled by push button or switch (230 V air vents).

ALIZE HYGRO ELEC:

Humidity-controlled basic flow and complementary controlled by switch. 230V power supply

ALIZE HYGRO TEMPO ELEC:

Humidity-controlled base flow and complementary with a 30-minute timer controlled by push button. 230V power supply

Mounting can be done in a wall or ceiling position, in compliance with the following requirements:

In the wall position, the vents are mounted by a simple interlocking system on a Ø 125 mm duct or on a Ø125 mm sleeve to be sealed. The lip seal provides support and sealing.

On the ceiling, the implementation can be carried out using a drywall 3-claw adapter sleeve or a Ø125 mm through-slab sleeve.

The vents have 2 fixing holes.

It is advisable to screw the vents to the wall or ceiling using the holes provided for this purpose. The electric vents must be fixed. The vents have a cable grommet for the power supply.

The 230 V supply to the vent must be provided by a cable

2 wires (2 x 1.5 mm²) that must be built in and must come out at the rear of the support plate. This power supply must include a suitable protection device identified on the electrical panel in order to be able to carry out interventions on the vent.

Class II electrical appliance.

The vent must be screwed on the wall or the ceiling using the 2 holes provided on the plate.

Download Technical Data Sheet

The key points of the product

Easy maintenance

Regular maintenance of the products is necessary in order to guarantee optimal efficiency.

Warranty

All our products are guaranteed for 2 years.

French made

Our products are manufactured and assembled in France, in our factories in Torcieu in the Ain department.

230V power supply

The electrical supply is 230 V. The maximum flow is obtained by activating an opening push button (TEMPO ELEC) or a switch (ELEC) with a time delay of 30 minutes for TEMPO ELEC.

Humidity-controlled

The Alizé Hygro Elec with and without Timer modulates the airflows extracted according to the relative humidity of the premises in which they are installed.

Authenticity
and Commitment

We have a real identity that guides our actions on a daily basis and and has shaped our choices for more than 60 years.

We are fully committed to keeping our promises to our clients and ‘Stakeholders’.

Alizé hygro Elec with or without tempo timer

The key points of the product

Authenticity and Commitment

Authenticity
and Commitment