Alizé Auto Singl Flowrate

Extract vents for the ALIZÉ range self-regulating system

The ALIZÉ AUTO single-flow vent provides a determined extraction flow in a pressure range between

50 and 160 Pa.

Mounting can be done in a wall or ceiling position, in compliance with the following requirements:

In the wall position, the vents are mounted by a simple interlocking system on a Ø 125 sleeve previously fixed to the duct. The lip seal provides support and sealing.

For mounting the ALIZÉ 120 and 150 m³/h on a sleeve

Ø 99 mm, use the spacer (code 1941).

On the ceiling, the installation can be carried out using a drywall 3-claw adapter sleeve or a Ø125 mm through-slab sleeve, or, for sanitary vents Ø 125/80 mm.

The vents have 3 fixing holes. It is advisable to screw the vents to the wall or ceiling using the 3 holes provided for this purpose. The electric vents must be fixed. See diagram opposite.

The vents have a cable grommet for the power supply.

ALIZÉ AUTO single-flow vents are intended to be installed in sanitary facilities in collective housing (15 and 30 m³/h) and tertiary premises.

Download Technical Data Sheet

The key points of the product

Easy maintenance

Regular maintenance of the products is necessary in order to guarantee optimal efficiency.

Warranty

All our products are guaranteed for 2 years.

French made

Our products are manufactured and assembled in France, in our factories in Torcieu in the Ain department.

Self-regulating

Single-flow auto Alizé units are used to regulate the airflows extracted from the service rooms of residential accommodation and tertiary premises.

Authenticity
and Commitment

We have a real identity that guides our actions on a daily basis and that irrigates our choices for more than 60 years now.

We are fully committed to keeping our promises to our clients and ‘Stakeholders’.

Alizé Auto Singl Flowrate

The key points of the product

Authenticity and Commitment

Authenticity
and Commitment