The SRT+ silencer, entirely made of sheet metal, is installed in all the linings after having made the circular hole in the wall and sealed a PVC sleeve Ø 125 mm. The installation is done inside the lining associated with an adjustment sleeve.
The SRT+ 30/57 model is associated with an ISOLA 2 22 or 30 m³/h self-regulating air inlet.
The SRT+ 45/54 model is associated with an ISOLA 2 45 m³/h self-regulating or ISOLA HY humidity-controlled air inlet.
Drill the wall and seal a PVC sleeve Ø 125 mm with a slight slope towards the outside.
On the exterior side, fit the louvred grille once the coatings are finished.
Fix the silencer to the wall using the 2 fixing lugs located on the sides.
Do not forget to cover the walls of the SRT+ with insulation in order to avoid any thermal bridges.
The MPR sleeve must penetrate at least 10 mm into the SRT+. Implementation of SRT+ in linings with thicknesses of 90 + 10 to 110 + 10 mm.
For thicker linings, add a second adjustment sleeve.
We have a real identity that guides our actions on a daily basis and that irrigates our choices for more than 60 years now.
We are fully mobilized to keep our promises to our customers and stakeholders.
What is invisible is often what is most valuable. We are “wellness manufacturers”. We design products that improve living conditions.