Used as part of an ALIZÉ 2018 humidity-controlled ventilation system for collective housing or individual housing under Technical Approval, the ISOLA HY air inlets are associated with the system's humidity-controlled or timed extract vents. They are characterized under a pressure difference of 20 Pa by a variable flow rate of 5 to 45 m³/h depending on the humidity level of the room. The ISOLA HY or ISOLA HY RA humidity-controlled air inlet, installed on the inside, is made of polystyrene. Installation in the main rooms (living rooms and bedrooms) for the supply of fresh air from single-flow humidity-controlled mechanical ventilation systems.
Operation on vertical walls and all inclined planes (e.g. roof window, underside of roller shutter box, etc.)
The front cap, placed on the outside, is made of UV and weather resistant polystyrene in the same colors as the air inlets.
Assembly exclusively on surfaces sheltered from the weather. In the case of unsheltered surfaces, contact us.
On the inside, the base of the air inlet (ISOLA HY) or the acoustic extension (ISOLA HY RA), is fixed by 3 screws. Assembly of the cover by a simple interlocking system. For assembling on curved joinery, use the curved base placed between the air inlet and the joinery.
On the outside, the cap centered on the notch is fixed by 3 screws.
The components must remain easily accessible for maintenance.
For mounting on a through-wall penetration silencer, refer to the products: STM, SRT+ or window top SHF.
Installation also possible with through-wall sleeves.
We have a real identity that guides our actions on a daily basis and that irrigates our choices for more than 60 years now.
We are fully mobilized to keep our promises to our customers and stakeholders.
What is invisible is often what is most valuable. We are “wellness manufacturers”. We design products that improve living conditions.