Alizé Auto Tempo Dual Flowrate

Extract vents for the ALIZÉ range self-regulating system

The ALIZÉ AUTO TEMPO dual flow vents provide a determined extraction flow in a pressure range between 50 and 160 Pa and an additional extraction flow.

ALIZÉ AUTO TEMPO vents are available in 3 models for each flow rate:
ALIZÉ AUTO TEMPO cord: cord control
ALIZÉ AUTO TEMPO elec: control by push button – 230 V power supply
ALIZÉ AUTO TEMPO with batteries*: control by push button – Powered by batteries (3 x 1.5 V)

* ALIZÉ AUTO TEMPO 45/120 batteries non-certified product

Mounting can be done in a wall or ceiling position, in compliance with the following requirements:

In the wall position, the vents are mounted by a simple interlocking system on a Ø 125 sleeve previously fixed to the duct. The lip seal provides support and sealing.
For mounting the ALIZÉ 120 and 150 m³/h on a sleeve
Ø 99 mm, use the spacer (code 1941).

On the ceiling, the installation can be carried out using a drywall 3-claw adapter sleeve or a Ø125 mm through-slab sleeve, or, for sanitary vents Ø 125/80 mm.

The vents have 3 fixing holes. It is advisable to screw the vents to the wall or ceiling using the 3 holes provided for this purpose. The electric vents must be fixed. See diagram opposite.
The vents have a cable grommet for the power supply.

ALIZÉ AUTO TEMPO dual flow vents are intended to be installed in the kitchen.

• Cord control: In the case of ceiling mounting, it is necessary to use an angle piece to guide the cord.

• 230 V power supply: the vent must be powered by a 2-wire cable (2 x 1.5 mm²) that must be built in and must come out at the back of the support plate. This power supply must include a suitable protection device identified on the electrical panel in order to be able to carry out interventions on the vent. Class II electrical appliance.
It is imperative to screw the vent onto the wall or the ceiling using the 3 holes provided on the plate.

• Battery powered: the vent must be connected to the closing push button by a 2-wire cable that must be built in and must come out at the rear of the support plate (diagram opposite). Connection on the terminal block.
It is advisable to screw the vent on the wall using the 3 holes provided on the plate.
Check battery life annually. When the shutter no longer opens correctly (no more motor noise), the batteries must be changed.

Download documentation

Download the certificate

The key points of the product

Easy maintenance

Regular maintenance of the products is necessary in order to guarantee optimal efficiency.

Warranty

All our products are guaranteed for 2 years.

French made

Our products are manufactured and assembled in France, in our factories in Torcieu in the Ain department.

Cord control

The maximum flow is obtained manually by activating the cord with a time delay of 30 minutes.

230V power supply

The 230 V power supply is permanent via a normally closed contact. The maximum flow is obtained by activating an opening push button with a time delay of 30 minutes.

Battery powered

Power is supplied by 2 batteries
1.5 V type LR6 (not supplied). The maximum flow is obtained by pressing a closing push button with a time delay of 30 minutes.

Authenticity
and Commitment

We have a real identity that guides our actions on a daily basis and that irrigates our choices for more than 60 years now.

We are fully mobilized to keep our promises to our customers and stakeholders.

Alizé Auto Tempo Dual Flowrate

The key points of the product

Authenticity and Commitment

Authenticity
and Commitment